Weight Sensor (Load Cell) 5KG
This weight sensor (load cell) is suitable for electronic balance and other high accuracy electronic weighing devices.
Specifications
- Rated load: 5 Kg
- Output: 2mv / v
- Temperature zero drift: 0.1% F.S
- Output sensitivity: ± 0.15mv / v
- Temperature sensitivity: 0.05% F.S
- Insulation resistance: ≥ 2000MΩ
- Excitation voltage: 5-10VDC
Wire Connection
The load cell acts like a bridge, it has 4 colored wires as follows
- VCC: Red wire
- GND: Black wire
- Signal +: Green wire
- Signal -: White wire
Installation in Weight Scale
It is recommended to use the load cell with Future Electronics Egypt weight scale analog to digital and amplifier module as shown in photo below. In this case you can connect the weight scale module to your Arduino or Micro-controller through serial pins and record or display your measurements
For basics of load cell and weight sensors, please click here
Original: $1.52
-70%$1.52
$0.46Weight Sensor (Load Cell) 5KG
This weight sensor (load cell) is suitable for electronic balance and other high accuracy electronic weighing devices.
Specifications
- Rated load: 5 Kg
- Output: 2mv / v
- Temperature zero drift: 0.1% F.S
- Output sensitivity: ± 0.15mv / v
- Temperature sensitivity: 0.05% F.S
- Insulation resistance: ≥ 2000MΩ
- Excitation voltage: 5-10VDC
Wire Connection
The load cell acts like a bridge, it has 4 colored wires as follows
- VCC: Red wire
- GND: Black wire
- Signal +: Green wire
- Signal -: White wire
Installation in Weight Scale
It is recommended to use the load cell with Future Electronics Egypt weight scale analog to digital and amplifier module as shown in photo below. In this case you can connect the weight scale module to your Arduino or Micro-controller through serial pins and record or display your measurements
For basics of load cell and weight sensors, please click here
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
This weight sensor (load cell) is suitable for electronic balance and other high accuracy electronic weighing devices.
Specifications
- Rated load: 5 Kg
- Output: 2mv / v
- Temperature zero drift: 0.1% F.S
- Output sensitivity: ± 0.15mv / v
- Temperature sensitivity: 0.05% F.S
- Insulation resistance: ≥ 2000MΩ
- Excitation voltage: 5-10VDC
Wire Connection
The load cell acts like a bridge, it has 4 colored wires as follows
- VCC: Red wire
- GND: Black wire
- Signal +: Green wire
- Signal -: White wire
Installation in Weight Scale
It is recommended to use the load cell with Future Electronics Egypt weight scale analog to digital and amplifier module as shown in photo below. In this case you can connect the weight scale module to your Arduino or Micro-controller through serial pins and record or display your measurements
For basics of load cell and weight sensors, please click here
